Duckbill Board Support Package

This document helps you to get familiar with the Board Support Package of Duckbill, that is the default firmware which is pre-installed on the internal eMMC on Duckbill 2 based devices or can be flashed to SD cards (for former Duckbills).

This document only describes the Board Support Package revision 2.x; the former Board Support packages are not supported anymore. We strongly recommend to upgrade your application to this new BSP since it is much simpler than the former one.

Since Duckbill and Duckbill 2 are very similar, this document focuses the differences only where really needed. In all other cases, there is no weighting on this point.

It is assumed, that the reader is at least familiar with Linux on desktop systems.

This BSP documentation applies to several product variants: