.. Duckbill BSP documentation master file, created by sphinx-quickstart on Tue Jan 19 10:19:44 2016. You can adapt this file completely to your liking, but it should at least contain the root `toctree` directive. Duckbill Board Support Package ============================== This document helps you to get familiar with the Board Support Package of Duckbill, that is the default firmware which is pre-installed on the internal eMMC on Duckbill 2 based devices or can be flashed to SD cards (for former Duckbills). This document only describes the Board Support Package revision 2.x; the former Board Support packages are not supported anymore. We strongly recommend to upgrade your application to this new BSP since it is much simpler than the former one. Since Duckbill and Duckbill 2 are very similar, this document focuses the differences only where really needed. In all other cases, there is no weighting on this point. It is assumed, that the reader is at least familiar with Linux on desktop systems. This BSP documentation applies to several product variants: * :ref:`duckbill-2` * :ref:`duckbill-2-485` * :ref:`duckbill-2-enocean` * :ref:`duckbill-2-spi` .. _duckbill-2: Duckbill 2 ---------- .. toctree:: :maxdepth: 2 general duckbill-2_pin-muxing login duckbill-2_leds uarts i2c adc networking partitions sdcard duckbill-2_preinstalled-packages faqs sources .. _duckbill-2-485: Duckbill 2 485/Duckbill 2 485+ ------------------------------ .. toctree:: :maxdepth: 2 general login duckbill-2_rs485_leds duckbill-2_rs485_uarts networking partitions sdcard faqs sources .. _duckbill-2-enocean: Duckbill 2 EnOcean ------------------ .. toctree:: :maxdepth: 2 general login duckbill-2_enocean_leds duckbill-2_enocean_uarts networking partitions sdcard faqs sources .. _duckbill-2-spi: Duckbill 2 SPI -------------- .. toctree:: :maxdepth: 2 general login duckbill-2_spi_leds spi duckbill-2_spi_networking partitions faqs sources